Das Architectural Institute of Japan (AIJ) hat eine Reihe an bekannten Benchmark-Szenarien für Windsimulation vorgestellt. Der Nachfolgende Beitrag dreht sich dabei um den "Case E - a building complex in an actual urban area with dense concentration of low-rise buildings in Niigata City". Im Folgenden wird das beschriebene Szenario in RWIND2 nachgebildet und die Ergebnisse mit den simulierten und der experimentellen Resultate des AIJ verglichen.
Das Architectural Institute of Japan (AIJ) hat eine Reihe an bekannten Benchmark-Szenarien für Windsimulation vorgestellt. Der Nachfolgende Beitrag dreht sich dabei um den "Case D - high-rise building among city blocks". Im Folgenden wird das beschriebene Szenario in RWIND2 nachgebildet und die Ergebnisse mit den simulierten und der experimentellen Resultate des AIJ verglichen.
Das Verifikationsbeispiel beschreibt Windlasten aus mehreren Anströmrichtungen am Modell einer Gebäudegruppe. The model consists of eight cubes. The velocity fields obtained by the RWIND simulation are compared with the measured values from the experiment. The experimental data are measured using a thermistor anemometer in the wind tunnel.
Das vorliegende Verifikationsbeispiel beschreibt Druckbelastungen an den Wänden von Gebäuden in Tandemanordnung, die sich in Bodennähe befinden. The buildings are simplified to rectangular objects and scaled down while maintaining the elevation ratios. The pressure distribution on the walls of the model of a medium-high building was conducted by an experiment. The chosen results (pressure coefficient Cp) are compared with the measured values.
Das Verifikationsbeispiel beschreibt die stationäre Umströmung an einem isolierten Gebäude (skaliertes Modell) am Beispiel von Architectural Institute of Japan (AIJ). The chosen results (velocity magnitude) are compared with the measured values.
This verification example compares wind load calculations on a duopitch roof building using the ASCE 7-16 standard and using CFD simulation in RWIND Simulation. Das Gebäude wird anhand der Skizze und des in der Norm ASCE 7-16 enthaltenen Anströmgeschwindigkeitsprofils definiert.
This verification example compares wind load calculations on a flat roof building using the ASCE 7-16 standard and using CFD simulation in RWIND Simulation. Das Gebäude wird anhand der Skizze und des in der Norm ASCE 7-16 enthaltenen Anströmgeschwindigkeitsprofils definiert.
Im Verifikationsbeispiel wird die Windlastberechnung an einem Gebäude mit Satteldach unter Verwendung der Norm EN 1991-1-4 mit der CFD-Simulation in RWIND Simulation verglichen. The building is defined according to the sketch, and the inflow velocity profile is taken according to the standard EN 1991-1-4.
Im Verifikationsbeispiel wird die Windlastberechnung an einem Flachdachgebäude unter Verwendung der Norm EN 1991-1-4 mit der CFD-Simulation aus RWIND Simulation verglichen. The building is defined according to the sketch, and the inflow velocity profile is taken according to the standard EN 1991-1-4.
Ein Einmassensystem mit Lochspiel und zwei Federn wird zunächst einer Durchbiegung ausgesetzt. Determine the natural oscillations of the system - deflection, velocity, and acceleration time course.
Eine Membran wird anhand isotroper Vorspannung zwischen zwei Radien von zwei konzentrischen Zylindern gedehnt, die nicht in einer Ebene parallel zur vertikalen Achse liegen. Find the final minimum shape of the membrane - the helicoid - and determine the surface area of the resulting membrane. The add-on module RF-FORM-FINDING is used for this purpose. Elastic deformations are neglected both in RF-FORM-FINDING and in the analytical solution; self-weight is also neglected in this example.
A strut with a circular cross-section is supported according to four basic cases of Euler buckling and subjected to pressure force. Ermitteln Sie die Verzweigungslast.
Dieses Verifikationsbeispiel basiert auf dem Verifikationsbeispiel 0122. A single-mass system without damping is subjected to an axial loading force. An ideal elastic-plastic material with characteristics is assumed. Determine the time course of the end-point deflection, velocity, and acceleration.
Eine symmetrische flache Struktur besteht aus acht gleichen Fachwerkstäben, die in Gelenklagern eingebettet sind. The structure is loaded by a concentrated force and alternatively by imposed nodal deformation over the critical limit point when the snap-through occurs. Imposed nodal deformation is used in RFEM 5 and RSTAB 8 to obtain the full equilibrium path of the snap-through. The self-weight is neglected in this example. Determine the relationship between the actual loading force and the deflection, considering large deformation analysis. Evaluate the load factor at the given deflections.
Eine Struktur besteht aus vier Fachwerkstäben, die in Gelenklagern eingebettet sind. The structure is loaded by a concentrated force and alternatively by imposed nodal deformation over the critical limit point, when snap-through occurs. Imposed nodal deformation is used in RFEM 5 and RSTAB 8 to obtain the full equilibrium path of the snap-through. The self-weight is neglected in this example. Determine the relationship between the actual loading force and the deflection, considering large deformation analysis. Evaluate the load factor at given deflections.
A thin rectangular orthotropic plate is simply supported and loaded by uniformly distributed pressure. The directions of axes x and y coincide with the principal directions. Bestimmen Sie maximale Durchbiegung der Platte, ohne das Eigengewicht dabei zu berücksichtigen.
Ein gedämpftes Einmassensystem ist einer konstanten Lastkraft ausgesetzt. Determine the deflection and velocity of the dashpot endpoint in the given test time.
Es wird eine unter Druckbelastung bestehende Schalendachkonstruktion modelliert, bei der die geraden Kanten frei sind, während an den gekrümmten Kanten die y- und z-Verschiebungen eingeschränkt sind. Neglecting self‑weight, compute the maximum (absolute) vertical deflection, and compare the results with COMSOL Multiphysics 4.3.
Am oberen Ende ist ein Stab mit quadratischem Querschnitt befestigt. The rod is loaded by self-weight. For comparison, the example is also modeled with the concentrated force load, the value of which is equal to the gravity. The aim of this verification example is to show the difference between these types of loading, although the total loading force is equal.
Ein Mauerwerk ist in der Mitte seines oberen Querschnitts einer verteilten Last ausgesetzt. The Isotropic Masonry 2D material model is compared with the Isotropic Linear Elastic model, with surface stiffness property Without Tension in the nonlinear calculation.
A member with the given boundary conditions is loaded by torsional moment and axial force. Neglecting its self-weight, determine the beam's maximum torsional deformation as well as its inner torsional moment, defined as the sum of a primary torsional moment and torsional moment caused by the normal force. Vergleichen Sie diese Werte, während Sie den Einfluss der Normalkraft annehmen oder nicht berücksichtigen. The verification example is based on the example introduced by Gensichen and Lumpe.
Stellen wir uns ein biegesteifes Gerüstrohr vor, das durch einen Knotenlager für Gerüst unten befestigt und sowohl durch ein Moment als auch durch eine Kraft belastet wird. Calculate the maximum deflection with consideration of initial slippage.
Stellen wir uns ein biegesteifes Gerüstrohr vor, das durch einen Knotenlager für Gerüst unten befestigt und sowohl durch ein Moment als auch durch eine Kraft belastet wird. Calculate the maximum radial deflection by exceeding the capacity of the scaffolding support.
Vier Stützen sind unten fixiert und oben durch einen starren Block verbunden. The block is loaded by pressure and modeled by an elastic material with a high modulus of elasticity. The outer columns are modeled by linear elastic material and the inner columns by a stress-strain diagram with decaying dependence. Assuming only the small deformation theory and neglecting the structure's self-weight, determine its maximum deflection.
Bestimmen Sie das Biegemoment, welches den Stab am freien Ende des Kragarms in eine kreisförmige Form biegt. Neglecting the beam's self-weight, assuming the large deformation analysis, and loading the cantilever with the moment, determine its maximum deflections.
Ein I-Profil-Kragträger ist am linken Ende gelagert und durch Moment belastet. The aim of this example is to compare the fixed support with the fork support and to investigate the behavior of some representative quantities. Comparison is also made to the solution by means of plates. Small deformations are considered, and the self-weight is neglected. Determine the rotation in the midpoint of the cantilever, and in case of the member entity with warping, determine the values of the primary torsional moment, the secondary torsional moment, and the warping moment both on the left end (point A) and the right end (point B).
A steel cantilever with a rectangular cross‑section is fully fixed on one side and free on the other. Das Ziel von diesem Verifizierungsbeispiel ist, die Eigenfrequenzen der Struktur zu ermitteln.
Es wird ein Kragträger mit einem I-Trägerquerschnitt der Länge L definiert. The beam has five mass points with masses m acting in the X-direction. The self-weight is neglected. The frequencies, mode shapes, and equivalent loads of this 5-DOF system are analytically calculated and compared with the results from RSTAB and RFEM.
Ein axial belasteter Stahlträger mit quadratischem Querschnitt ist an einem Ende gelenkig gelagert und am anderen Ende federnd gelagert. Two cases with different spring stiffnesses are considered. The verification example solves the calculation of the load factors of the beam in the image using the linear stability analysis.
Bestimmen Sie die maximale Durchbiegung von vier unten befestigten Stützen, die oben durch einen starren Block verbunden sind. The block is loaded by pressure and modeled by an elastic material with a high modulus of elasticity. The outer columns are modeled as orthotropic elastic material, and the inner columns as orthotropic elastic-plastic material with the same elastic parameters as the outer columns and plasticity properties defined according to the Tsai-Wu plasticity theory.